Omvormer PV24s 24V -> 12V Continue 24A / Periodiek 30A non-isolated

Technische Info:<br>Input voltage range 17-32Vdc<br>Output voltage 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.<br>Intermittent output power As stated, taken for a maximum of 2 minutes followed by 8 minutes rest<br>Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles<br>Electrostatic voltage protection Meets ISO10605, ISO14982, >8kV contact, 15kV discharge<br>Output noise <50mV pk-pk at continuous load. Meets CISPR25.<br>Off load current (quiescent current) <15mA<br>Power conversion efficiency Typically: 90% for non-isolated units, 85% for isolated units, *95%<br>Isolation >400Vrms between input, output and case, on isolated products only<br>Operating temperature -25°C to +30°C to meet this specification table<br>+30°C to +80°C de rate linearly to 0A<br>Storage temperature -25°C to +100°C<br>Operating humidity 95% max., non-condensing<br>Casework Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533<br>Connections Four 6.3mm push-on flat blade connectors *(5 way Phoenix connector including enable on/off<br>terminal and mating half)<br>Output indicator Green LED adjacent to output terminals<br>Mounting method Click ‘n’ fit mounting clip, fitted separately using three hole fixture * 4 hole cradle<br>Safe area protection: Over current<br>Over heat<br>Transients<br>Catastrophic protection<br>Limited by current sensing circuit<br>Limited by temperature sensing circuit<br>Protected by filters and rugged component selection<br>Protected by internal input and output fuses<br>Approvals 2014/30/EU The general EMC directive<br>Regulation 10 The automotive directive<br>93/68/EEC The CE marking directive<br>Designed to EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B.<br>Markings CE and E (automotive) marked<br><strong><br>Geschikt voor:</strong><br>24V>12V<br>