Omvormer PV12s-A 24V -> 12V Continue 12A / Periodiek 18A Dual Output non-isolated

Input voltage range 17-32Vdc<br>Output voltage 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.<br>Output Power As stated, from either output or combination of both. intermittent ratings as stated, taken for a maximum of 2 minutes followed by 8 minutes rest.<br>Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles<br>Electrostatic voltage protection Meets ISO10605, ISO14892, >8kV contact, 15kV discharge<br>Output noise <50mV pk-pk at continuous load. Meets CISPR25 and VDE0879-3<br>Off load current (quiescent current) <15mA<br>Power conversion efficiency Typically: 90%<br>Operating temperature -25ºC to +30ºC to meet this specification table<br>+30ºC to +80ºC de rate linearly to 0A<br>Storage temperature -25ºC to +100ºC<br>Operating humidity 95% max., non-condensing<br>Casework Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533<br>Connections Five 6.3mm push-on flat blade connectors<br>6-way 070 connector (PV12s-A)<br>Output indicator Green LED adjacent to output terminals. None on PV12s-A<br>Mounting method ‘Click ‘n’ fit mounting clip, fitted separately using three hole fixture<br>Safe area protection: <br>Over current <br>Limited by current sensing circuit<br>Over heat Limited by temperature sensing circuit<br>Transients Protected by filters and rugged component selection<br>Catastrophic protection Protected by internal input and output fuses<br>Approvals 2014/30/EC The general EMC directive<br>Regulation 10 The automotive directive <br>93/68/EEC The CE marking directive<br>Markings CE and E (automotive) marked<br><strong><br>Geschikt voor:</strong><br>24V>12V<br>